Máy chế biến gỗ YOM-3/4

Giá: Liên hệ

Mô tả:Máy chế biến gỗ YOM-3/4 được thiết kế để sản xuất mộng khác nhau cùng một lúc, kết hợp đầu linh hoạt để đáp ứng yêu cầu công việc cụ thể. Bảng đúp vào phía trước và phía sau, cho phép hoạt động cả hai bên để tăng hiệu quả.Xe đẩy trượt trên thanh thép lớn. Tốc độ cắt cao dao động có độ ổn định tối đa

Thông tin chi tiết

Máy chế biến gỗ YOM-3/4

YOM-3

• 3~6 Head Configuration
• 3 sets tilting carriages

YOM-4 4~6 Head Configuration

• 3 sets tilting carriages
• 1 set horizontal carriage

Outstanding Features:

1. This highly productive mortiser is designed for producing various mortises simultaneously.

2. Flexible head combination to meet specific job requirements.

3. Double tables on front and back sides, permitting both sides operations for increased efficiency.

4. Cutter speeds are frequency inverter controlled, providing variable speeds change.

5. The entire operation motions are conveniently controlled by simply pressing the foot switch.

6. Each carriage is adjusted independently.

7. Two speeds cutter oscillation permits high/low speed change.

8. Carriages slide on big steel rods. High speed cutter oscillation features maximum stability.

9. Mortise width and depth are adjustable.

10. The machine is designed for both mortising and drilling functions.

11. Carriages are well constructed for adjusting mortise width independently.

Mortising Head

Mortising head is directly driven by an independent 1.8HP motor. Two cutters fitted on both ends of spindle perform both sides mortising simultaneously.
Mortising head position can be adjusted in right/left, up/down directions.
Collet chuck clamps /unclamps the cutter for quick tool change.

Carriage

The machine is constructed of three tilting carriages and one horizontal carriage. Each carriage can be fitted with one or two mortising head as customer's requirement.
Each carriage can be tilted independently. Maximum tilting angle is 20°.
Picture shown model YOM-4 is equipped with three tilting carriages and one horizontal carriage.

Variable Cutter Speed

The cutter running is controlled by a high performance frequency inverter, permitting for variable speeds adjustment. Wide speed range is from 6,000 to 12,000 RPM.

Control Panel

All of machine motions are grouped in one control panel for operation convenience, including cutter oscillation, motor ON/OFF control, and clamping cylinder control etc.

Independent Mortising Head Control

Each mortising head is controlled by an independent switch. The operator may adjust mortise position as desired for maximum flexibility.

Thông số kỹ thuật của máy:

Model/ Kiểu máy	YOM-3	YOM-4
Numbers of carriage/ Hệ thống vận chuyển	3 sets	4 sets
Numbers of spindle/ Số trục chính	3~6 spindle	4~6 spindle
Max. mortise width/ Chiều rộng lớn nhất lỗ mộng	100 mm	100 mm
Max. mortise depth/ Chiều sâu lớn nhất lỗ mộng	50 mm	50 mm
Cutter diameter/ Đường kính cắt	Ø6~Ø25 mm	Ø6~Ø25 mm
Cutter shank diameter/ Đường kính chuôi cắt	Ø16 mm	Ø16 mm
Distance between spindles/ Khoảng cách giữa các tay giữ	90~1000 mm	90~1000 mm
Oscillation speed (2 speeds)/ Tốc độ dao động	95 / 190 strokes	95 / 190 strokes
Spindle speeds/ Tốc độ trục chính	5000, 10000 R.P.M.	5000, 10000 R.P.M.
Tilted mortise angle/ Góc nghiêng lỗ mộng	20°	20°
Spindle motor/ Động cơ trục chính	1.8 HP	1.8 HP
Oscillation drive motor/ Động cơ giao động	1 HP	1 HP
Total horsepower/ Tổng công xuất	4.8 kw (6.4 HP)	6.2 kw (8.2 HP)
Working air pressure/ Áp suất làm việc	6 BAR	6 BAR
Dust hood outlet diameter/ Đường kính ra	ø4" x 2	ø4" x 2
Gross weight	1650 kgs	1750 kgs
Machine dimensions/ Kích thước máy	2200x1420x1480 mm	2200x1420x1650 mm
Packing dimensions/ Kích thước đóng gói	2330x1600x1550 mm	2330x1510x1850 mm